General Gun News

Subscribe to General Gun News feed
Updated: 2 hours 5 min ago

2 Million 9mm Pistols Born in 2018 as Gun Production Numbers Grow

Fri, 08/23/2019 - 04:00

U.S.-based gun makers produced over 8.6 million new firearms last year, with almost a quarter of those being 9mm pistols. (Photo: Chris Eger/Guns.com)

Initial gun production numbers are in from 2018, showing an increase from the previous year’s figures and the solid popularity of 9mm handguns.

According to the latest figures from the Bureau of Alcohol, Tobacco, Firearms and Explosives, 8,669,259 new firearms of all sorts were produced last year. This is up from 8,327,792 released into commerce in 2017.

The largest single category of firearms produced in 2018 was in pistols chambered larger than .380ACP to 9mm, with 2,281,450 handguns logged. This is up significantly from 1,756,618 in the same category reported in 2017.

By further comparison, 11.49 million new firearms were produced in 2016 — a modern record — while just over 9 million were produced in both 2015 and 2014. Earlier in the century, domestic gun production numbers remained largely constant at between 3 to 4 million from 2000 to 2008 and then began surging upwards to the 2016 peak, coinciding with the administration of President Obama.

The latest information comes as part of the interim installment of the ATF’s Annual Firearms Manufacturers and Export Report. These reports, compiled from all licensed gun makers in the country large and small, are delayed a year due to the Trade Secrets Act. Because of this, the full 2018 data, broken down by manufacturers, will not be available until next year.

According to the full 2017 report, the top six domestic makers of 9mm pistols in the country by volume– not counting firearms that were imported from overseas– were Smith & Wesson (606,732 produced), Sig Sauer (368,264), Ruger (163,865), SCCY (150,235), Kimber (98,385) and Glock (94,665).

The post 2 Million 9mm Pistols Born in 2018 as Gun Production Numbers Grow appeared first on Guns.com.

Categories: Gun News

Building an AK-47 with Lee Armory

Thu, 08/22/2019 - 23:30

Though I am admittedly a pistol girl through and through, I have dabbled in AR-15s like most gun owners. Like adult Legos, these guns piece together quickly and easily. When the opportunity to try my hand at building my own AK-47 arose, thanks to Lee Armory, I jumped on the chance to add to my repertoire of guns. What I didn’t realize, though, was exactly how different the AK building process would prove to be.

Lee Armory, located in Phoenix, Arizona, are AK specialists — building home-grown AKs for Kalashnikov fans. The company also happens to offer an AK Building Course for AK enthusiasts who want to take their fandom and love to the next level by piecing together their very own rifle. Helmed by Josh Leighton of Lee Armory, the class is an intense look into how the storied Soviet rifles are made. With an invitation and some trepidation, I jumped in on a Lee Armory build class to see how an AK compares to building an AR.

Lee Armory had all the pieces of what soon would be an AK laid out waiting to meet the tools that would smash rivets and pound pieces into place. Under Leighton’s guidance, I moved from station to station slowly putting together the AK-47.  The steps were involved and as someone who isn’t familiar with tools beyond the basics, it felt a little daunting using all the machinery. Each step presented its own challenges, some of which I turned to Leighton to help me complete.

The parts of what would soon become a fully built AK-47. (Photo: Jacki Billings)

After a few hours of work, though, the job was complete. I slid the last few pieces of the AK into place and marveled at the firearm I had just built now resting in my hands. There was something so cool and fun about watching the rudimentary shapes of metal come together in the form of the famous AK-47. I didn’t have much time to marvel because the true test was upon us. After all that time and work I put into building the rifle, would it even fire?

Leighton directed me over to the test firing barrel nestled in the corner of Lee Armory’s factory. I placed the muzzle into the large hole of the blue barrel and pulled the trigger. Thankfully, it fired just as planned. After a few test shots to ensure it was truly functional we loaded up and headed to the range for a full test and evaluation.

Leighton testing out the AK. (Photo: Jacki Billings)

We spent the first part of our range time sighting the AK-47 in at 100-yards and once that was complete it was all fun from there. Slinging rounds of 7.62 downrange at steel targets, I was met with that satisfying ding signaling my bullets landing on target. I was ecstatic! I sat plinking with the AK I had built myself and it actually worked! The experience was intense —much different from the AR-15 I built several years ago.

I was hit with a realization of exactly why this AK build class is truly beneficial for those that want to build their own AK. Having Leighton there every step of the way to guide me and help me was essential in ensuring I built a functional and safe rifle free of frustration. Walking away from the hot Arizona range, I was really thankful that Lee Armory offers such a service and allowed me to be one of its students.

To this day, building my very own AK is one of the coolest experiences I’ve had and a memory I will surely treasure for years to come.

The author with the AK-47 she built. (Photo: Jacki Billings)

The post Building an AK-47 with Lee Armory appeared first on Guns.com.

Categories: Gun News

Pages